SIMULATION THE LONGITUDINAL STABILITY OF THE ROLLING PROCESS IN A STABLE MODE

Автор(и)

  • Олег Павлович Максименко Дніпровський державний технічний університет, Ukraine
  • Олександр Вікторович Нікулін Дніпровський державний технічний університет, Ukraine
  • Дар'я Ігорівна Лобойко Дніпровський державний технічний університет, Ukraine

DOI:

https://doi.org/10.31319/2519-8106.1(42)2020.207005

Ключові слова:

longitudinal stability, angle of neutral intersection, coefficient of friction, limit conditions

Анотація

Further analysis of limit rolling conditions in a stable mode with clarification of the mechanism of longitudinal stability of the strip in the rolls and development of recommendations on this issue.

Estimation of longitudinal stability of the strip based on the determination of the average resulting internal longitudinal forces.

The use of a new limit condition for a stable rolling process, based on the determination of the average resultant force of plastically deformed metal, is developed and substantiated.

For the first time, the criterion for optimization of the tension regimes for the construction of energy-saving rolling technology was proposed to use the values of the average resultant longitudinal forces of plastically deformable of the strip, which allowed proving the feasibility of conducting the process at close to zero values of this force.

Using the proposed criteria can more accurately determine the limit conditions of rolling, which in turn allows further improve compression and tension modes for continuous production of strips and sheets on the conditions under which the deformation process will proceed in optimum conditions in terms of energy and longitudinal stability strips and sheets in rolls.

Посилання

Tselikov, A. I. (1962) Teoriya rascheta usiliy v prokatnykh stanakh [Theory of calculation of efforts in rolling mills]. M. : Metallurgizdat [in USSR].

Grudev, A. P. (2001) Teoriya prokatki [Rolling theory]. M. : «SP Intermet Inzhiniring» [in Russia].

Vasylev, Ya. D., & Mynaev, A. A. (2010) Teoryia prodolnoi prokatky [Theory of longitudinal rolling]. Uchebnyk dlia mahystrantov VUZov. Donetsk [in Ukrainian].

Vasylev, Ya. D., & Potanovskyi, S. Y. (1988) Opredelenye uslovyi vedenyia protsessa kho-lodnoi prokatky tonkykh polos s mynymalnoi syloi [Determination of the conditions for conducting the process of cold rolling of thin strips with minimal force]. Yzvestyia vuzov. Chernaia metallurhyia – Proceedings of Higher Educational Institutions. Ferrous Metallurgy, 9. 68–71 [in Russia].

Vasylev, Ya. D., & Safian, M. M. (1976) Proyzvodstvo polosovoi y lystovoi staly [Production of strip and sheet steel]. K. : Vyshcha shkola [in USSR].

Hrudev, A. P. (1998) Zakhvatuvaiushchaia sposobnost prokatnykh valkov [The exciting ability of the rolling rolls]. M. : «SP Yntermet Ynzhynyrynh» [in Russia].

Chekmarev, A. P., Prokofev, V. I., Galitskiy, V. P. (1967). Eksperimentalnoe issledovanie maksimalnyih uglov zahvata pri ustanovivshemsya protsesse prokatki [Experimental study of maximal capture angles during steady rolling process]. Obrabotka metallov davleniem : Nauchnyie trudyi, DMetI – Metal forming: Scientific works, DMetI. M. : Metallurgiya, LII. 79–88 [in USSR].

##submission.downloads##

Опубліковано

2020-06-11

Номер

Розділ

Статті