DOI: https://doi.org/10.31319/2519-8106.2(41)2019.185038

MODELING OF EXPANDING SURFACES, WHICH INCIDENT BY TWO DIRECT DRIVE CURVESS

Сергій Сергійович Тищенко

Анотація


The geometric model of the expanding surface which is incident to two direction curves is considered. On the basis of the developed model, the conditions for the existence of the surface are derived, which makes it possible to apply the developed model to the design of machine-building products, in particular those working in a dense environment.

Ключові слова


geometry; surface; expansion surfaces; model; working bodies

Повний текст:

PDF (English)

Посилання


Golovanov, N.N. (2002). Geometricheskoe modelirovanie: nauchnoe . izdanie [Geometrical design: scientific publication] Moscow: Publishing house of physical and mathematical literature [in Russia]

Kotov, I.I. (1975) Metodicheskoe posobie po nachertatelnoy geometrii "Algoritmy konstruirovaniya karkasnykh poverkhnostey" [Methodical manual on descriptive geometry "Algorithms of constructing of framework surfaces"]. Moscow: Publishing House Mosk. Aviation in-that [in Russia]

Kotov, I.I. (1973). Nachertatelnaya geometriya. Kurs lektsiy dlya slushateley FPK [Descriptive geometry. A course of lectures for students of FPK]. Moscow: Publishing House Mosk. Aviation in-that [in Russia]

Malyy, A. D., & Popudnyak Yu. Ya., &. Ulchenko T. V., Starosolskaya T. V. (2014). Kvazilineynye graficheskie modeli prostranstva [Quasilinear graphical space mode]. Mosty ta tuneli: teorіya, doslіdzhennya, praktika – Bridges and tunnels: theory, research, practice, 5, 51–56 [in Ukraine]

Naydysh V.M. (1980). Konstruirovanie poverkhnostey iz mnogoparametricheskikh mnozhestv liniy i poverkhnostey [Designing surfaces from multiparameter sets of lines and surfaces] Nauchnye trudy Ukrainskoy selskokhozyaystvennoy akademii – Scientific works of the Ukrainian Agricultural Academy, 234, 141–144 [in Ukraine]

Naydysh V.M. (1981)Konstruirovanie poverkhnostey, prokhodyashchikh cherez ikh spetsialnye linii [Construction of surfaces passing through their special lines] Izvestie vysshikh uchebnykh zavedeniy: aviatsionnaya tekhnika – Izvesestie of higher educational institutions: aviation engineering, 2, 88–90 [in Russia]

Naydysh V.M. (1979) Razvertyvayushchiesya lineichatye poverhnosti zadannye liniei proc-transtva parametrov [Expanding ruled surfaces defined by a parameter space line] Prikladnaia geometriia i inzhenernaia grafika – Applied Geometry and Engineering Graphics, 27, 89–90 [in Ukraine]

Tishchenko S.S. (2007) Geometricheskaya adaptatsiya poverkhnostey pochvoobrabatyvayushchikh rabochikh organov k vypolnyaemomu protsessu [Geometric adaptation of the surfaces of tillage workers to the process being performed] Visnyk Kharkivskogo nacionalnogo tekhnichnogo universytety im p. vasylenka – Вісник Харківського national technical service to the university of the state government ім. P. Vasilenka, 59, 110–114 [in Ukraine]

Tishchenko S.S. (2005) Geometricheskaya model adaptivnoy poverkhnosti pochvoobrabaty-vayushchego rabochego organa intsidentnoy dvum krivym [Geometric model of the adaptive surface of a soil-cultivating working body incident to two curves] Sbornik nauchnyh rabot Krymskogo gosudarstvennogo universiteta – Collection of scientific works of the Crimean State University, 84, 242–247 [in Ukraine]

Tishchenko S.S., & Karas V.V. (2006) Konstruirovanie poverkhnosti okuchnika dlya propashnykh kultur po absolyutnym traektoriyam dvizheniya pochvy [Designing the surface of the hoop for row crops on absolute paths of soil movement] Visnyk Dnipropetrovskogo derzhavnogo agrouniversytety – Bulletin Dnipropetrovsk sovereign agroneurs, 1, 27–30 [in Ukraine]

Trukhina V.D. (1989) Primenenie vychislitelnoy tekhniki pri proektirovanii lemeshno-otvalnykh poverkhnostey [The use of computing in the design of plow-bottom surfaces]. Barnaul [in Russia].

Lawrence D. Brown. A semiparametric multivariate partially linear model: A difference approach / Lawrence D. Brown , Michael Levine ,Lie Wang // Journal of Statistical Planning and Inference. – 2016. – Vol. 178. – P. 99–111. doi:10.1016/j.jspi.2016.06.005




Текст

ISSN 2519-8106 (Print), eISSN 2519-8114 (Online)