DEVELOPMENT OF ROTARY UNITS MECHANICAL TRANSMISSION MATHEMATICAL MODEL

Автор(и)

  • Олександр Дмитрович Романюк Дніпровський державний технічний університет, Україна

DOI:

https://doi.org/10.31319/2519-8106.2(41)2019.185045

Ключові слова:

mechanical transmission, mass, shaft, rotary knot, designing

Анотація

In this paper a mathematical model of the assembly unit of the mechanical transmission rotation node is developed. On its base the dependences for calculating the mass of the rotational element of the model of the bearing shaft were obtained. The introduced general coefficients of constructive conversion of geometric parameters make it possible to estimate the mass of the rotating element in the first approximation at the stage of preliminary designing to stabilize the kinematic and dynamic characteristics of the machine aggregate without the use of additional masses.

Посилання

Gemintern V.N., & Kogan B.M. (1980) Metody optimal'nogo proektirovanija.[Methods of optimal design]. Moscow: Energiia [In Russian].

Sobol I.M., & Statnikov R.B. (2006) Vybor optimal'nyh parametrov v zadachah so mnogimi kriterijami [Choosing the optimal parameters in problems with many criteria]. Moscow: Drofa [In Russian].

J. Genta. (1988) Nakopiteli kineticheskoj energii. Teorija i praktika sovremennyh mahovichnyh system [Aggregators kinetic energy here. Theory and practice of advanced flywheel systems] Moscow: Mir [In Russian].

Romaniuk A.D. (2010) Metod mnogokriterialnoy optimizatsii parametrov zubchatyih mehanizmov [Method of multicriteria optimization of gears parameters]. Sbornik nauchnyh trudov Kerchenskogo gosudarstvennogo morskogo tehnologicheskogo universiteta "Mehanizacija proizvodstvennyh processov rybnogo hozjajstva, promyshlennyh i agrarnyh predprijatij. Mehanika tverdogo tela." – Collection of scientific works of the Kerch State Maritime Technological University "Mechanization of production processes in the fishing industry, industrial and agrarian enterprises. Mechanics of a solid body ", Issue 11, 81–85. [In Russian].

Romaniuk A.D. (2012) Opredelenie minimalnogo vremeni razgona mashinnogo agregata [Determination of the minimum time for the acceleration of the machine assembly] Sbornik nauchnyh trudov Kerchenskogo gosudarstvennogo morskogo tehnologicheskogo universiteta i Dneprodzerzhinskogo gosudarstvennogo tehnicheskogo universiteta "Mehanizacija proizvodstvennyh processov rybnogo hozjajstva, promyshlennyh i agrarnyh predprijatij. Mehanika tverdogo tela." – Collection of scientific works of Kerch State Maritime Technological University and Dneprodzerzhinsk State Technical University "Mechanization of production processes of fish industry, industrial and agrarian enterprises. Mechanics of a solid body ", Issue 13, 144–146 [In Russian].

Romaniuk A.D. (2013) Sintez peredatochnogo mehanizma optimalnogo po kriteriyu dinamichnosti [Synthesis of the transfer mechanism optimal by the criterion of dynamism] Sbornik nauchnyh trudov Dneprodzerzhinskogo gosudarstvennogo tehnicheskogo universiteta i Kerchenskogo gosudarstvennogo morskogo tehnologicheskogo universiteta "Mehanika tverdogo tela Mehanizacija proizvodstvennyh processov rybnogo hozjajstva, promyshlennyh i agrarnyh predprijatij" – Collection of scientific works of the Dneprodzerzhinsk State Technical University and the Kerch State Marine Technological University "Mechanics of the solid body. Mechanization of production processes in the fishing industry, industrial and agricultural enterprises. ", Issue 14, 20–23 [In Russian].

Romaniuk A.D. (2013) Osnovnyie podhodyi resheniya zadach sinteza peredatochnyih mehanizmov na osnove optimizatsii ego harakteristik [Basic approaches to solving the synthesis transmission’s problems of the mechanisms based on optimization of its characteristics] Sbornik nauchnyh trudov Dneprodzerzhinskogo gosudarstvennogo tehnicheskogo universiteta i Kerchenskogo gosudarstvennogo morskogo tehnologicheskogo universiteta "Mehanika tverdogo tela Mehanizacija proizvodstvennyh processov rybnogo hozjajstva, promyshlennyh i agrarnyh predprijatij" – Collection of scientific works of the Dneprodzerzhinsk State Technical University and the Kerch State Marine Technological University "Mechanics of the solid body. Mechanization of production processes in the fishing industry, industrial and agricultural enterprises. ", Issue 14, 24–26 [In Russian].

Romaniuk A.D., & Mamaev L.M., & Kabakov A.M., & Telepko L.P. (2016) Optimizatsiya peredatochnoy funktsii mehanizma [Optimization of the transfer functions of the mechanism] Materialy XII Mezhdunarodnoj nauchno-prakticheskoj konferencii "Aktual'nye nauchnye dostizhenija - 2016" – Materials of the XII international scientific and practical conference "Actual scientific achievements - 2016". (Vol. 11), (pp.14–17). Praha: Publishing House «Education and Science» [In Russian].

Romaniuk O.D. (2015) Vybir mahovyh mas lanok peredatochnyh mehanizmiv na osnovi optymizacii' peredatochnoi' funkcii' [The choice of wing parts by weight of gear mechanisms based on optimizing the transfer function]. Matematychne Modeliuvannia –Mathematical modeling, 2(33), 52–54 [in Ukrainian].

Romaniuk O.D. (2015) Optymizacija mas zubchastyh kolis mehanichnoi' peredachi na etapi poperedn'ogo proektuvannja [Optimization of the masses of gears mechanical transmission during the preliminary design]. Matematychne Modeliuvannia –Mathematical modeling, 2(35), 35–38 [in Ukrainian].

Romaniuk O.D. (2018) Rozrobka matematy`chnoyi modeli obertal`ny`x vuzliv mexanichnoyi peredachi [Basic approaches to mass optimization of toothed wheels of mechanical transmission]. Matematychne Modeliuvannia –Mathematical Modeling, 1(38), 118–123 [in Ukrainian].

##submission.downloads##

Опубліковано

2019-11-28

Номер

Розділ

Статті